Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - melky

Pages: [1] 2
1
Announcements / Re: Feng Office Mobile!
« on: July 19, 2011, 07:02:59 pm »
FROM: yannick-guerin
Quote
Hello everybody,

As karlstatt said, I think first of all we need full synchronisation with other PIM applications,PDAs, smartphones, etc...

And then, on top of that, why not build native applications, with all the project, docs, management side.

That's because smartphones already have calendars,tasks management and contact management, and IMHO,  we just need this to synchronised and immediately usable in other applications or in our phones.

To achieve this, I suggest looking to ActiveSync or SyncML, or both at same time. I'm not an expert at all and rathert a newbie when it comes to sync, but with these two technologies there's a great chance to cover 90% of cases (thunderbird still doesn't support both, but phones supports at least one of them).

You can start working with two libraries that proved they work:

z-push.sourceforge.net/soswp/ that is used with Zarafa for ActiveSync

wiki.horde.org/SyncMLCustomBackend?referrer=SyncML that is developed for Horde Project, download from Horde Pear : pear.horde.org/, search for package Horde_SyncMl

This pear repository contains other libraries that can be useful when it comes to sync.

I use php at work but only works on backends (no GUI or so), if help is needed, I have some time until September.

Of course, it will be better if the solution could handle with the workspace concept. My idea is that PIM is managed on a personal basis. Then one could register to some workspace sync. Later on, when synchronising his phone for example, fengoffice looks after each registration for sync and send/recieve informations based on this workspaces. That's easy in Fengoffice -> phone way, but could be tricky in the phone -> Fengoffice way.


Could you give some news on the progress of this project?

Yannick

ps: I had some problem with inserting links (not allowed to post links said the board...) so I edited this quite a lot and then deleted it. To moderators: If there are double post, feel free to delete them

Regards,

Yannick


2
Announcements / Re: Feng Office Mobile!
« on: July 19, 2011, 07:01:03 pm »
FROM "yannick-guerin"

Quote

Hello everybody,

As karlstatt said, I think first of all we need full synchronisation with other PIM applications,PDAs, smartphones, etc...

And then, on top of that, why not build native applications, with all the project, docs, management side.

That's because smartphones already have calendars,tasks management and contact management, and IMHO,  we just need this to synchronised and immediately usable in other applications or in our phones.

To achieve this, I suggest looking to ActiveSync or SyncML, or both at same time. I'm not an expert at all and rathert a newbie when it comes to sync, but with these two technologies there's a great chance to cover 90% of cases (thunderbird still doesn't support both, but phones supports at least one of them).

You can start working with two libraries that proved they work:

z-push.sourceforge.net/soswp/ that is used with Zarafa for ActiveSync

wiki.horde.org/SyncMLCustomBackend?referrer=SyncML that is developed for Horde Project, download from Horde Pear : pear.horde.org/, search for package Horde_SyncMl

This pear repository contains other libraries that can be useful when it comes to sync.

I use php at work but only works on backends (no GUI or so), if help is needed, I have some time until September.

Of course, it will be better if the solution could handle with the workspace concept. My idea is that PIM is managed on a personal basis. Then one could register to some workspace sync. Later on, when synchronising his phone for example, fengoffice looks after each registration for sync and send/recieve informations based on this workspaces. That's easy in Fengoffice -> phone way, but could be tricky in the phone -> Fengoffice way.


Could you give some news on the progress of this project?

Yannick

ps: I had some problem with inserting links (not allowed to post links said the board...) so I edited this quite a lot and then deleted it. To moderators: If there are double post, feel free to delete them

Regards,

Yannick


3
Getting Started / Re: Bug on view Week
« on: July 15, 2011, 07:41:43 pm »
that's just plain weird, look at my screen something is going on in your feng

4
Announcements / Re: Feng Office Mobile!
« on: July 15, 2011, 03:25:40 pm »
WELL thanks all for the great IDEAS!
Keep it up we wanna now what you need

5
Getting Started / Re: Mass assign tasks to a workspace
« on: July 12, 2011, 03:47:59 pm »
to the date there is no way to do this :S taking note for next version!

6
Getting Started / Re: Bug on view Week
« on: July 12, 2011, 03:35:09 pm »
what version of Feng do you have installed?

7
Getting Started / Re: Bug on view Week
« on: July 12, 2011, 12:51:28 am »
Try to reproduce it again and when it happens post the last entries of  your log.php file located at the /cache directory inside your installation folder.

8
Announcements / Re: Feng Office Mobile!
« on: July 12, 2011, 12:23:55 am »
Hi there, thanks for collaborate!
I think that either a google or an iphone sync is a great idea, a nice feature for Feng if I may say :D.
   -    You mentioned tasks and timeslots, which other feature would you like Feng mobile to have?
   -    Would you prefer  a native or a mobile web app?
   -    Facebook, linkedin, twitter integraton?

Hehe it may sound like an interrogation but we really appreciate your feedback and we want everyone to participate!
Keep it up

9
Announcements / Feng Office Mobile!
« on: July 07, 2011, 08:58:18 pm »
Feng Mobile Brainstorming, post your ideas, join the project, collaborate...

10
Announcements / Re: Feng Office 1.7.1 has been released!!!
« on: September 13, 2010, 06:26:09 pm »
Due to the discovery of some bugs in the FengOffice 1.7.1 we released FengOffice 1.7.2
This is the changelog!
 Since 1.7.1
    ------------
    bugfix: Cannot attach files from computer when composing an email.
    bugfix: Error when sending mail (with sync sent mails enabled).
    bugfix: Tab with no content was appearing after 1.7.1.

Download it FengOffice 1.7.2

Edit: Link fixed

11
Announcements / Feng Office 1.7.1 has been released!!!
« on: September 10, 2010, 04:38:09 pm »
Feng Office version 1.7.1: Introducing Task Subtypes, improved IMAP for emails and more
Feng Office development team announces the release of version 1.7.1.
This new version includes some new features, lots of usability improvements and bug fixes.

What’s new?
Main new features of this version are:

  • Definition of task subtypes
  • Saving sent email on IMAP server
  • Email login
  • Direct URL
  • Exact match on search results
  • New task status filters
  • Exporting all contacts to VCard
  • and more …
Find more information about these features after the break.

Task Subtypes
For those who have been using custom properties in tasks and found that their possibilities were limited, this solves your needs!

What are Task Subtypes? I’ll explain through an example. Suppose you work as a Virtual Assistant and register all your pending tasks in Feng Office. Let’s assume that as a Virtual Assistant you do translations and SEO optimization.

For each translations you create a task and want to keep track of:
  • How long the document is (Words Count)
  • The source language

For SEO tasks, you wish to register:
  • The URL of the page you wish to optimize
  • The keywords for that page

Using task Subtypes you are now able to adapt Feng Office to your specific requirements. To do it you should complete two simple steps:

1.- Create the Task Subtypes in the Administration Panel


2.- Again through the Administration Panel, define the Custom Properties, setting that they should only apply to certain Task Subtypes


Once setup is over, you can start using task subtypes.

Whenyou create a task, you’ll be able to define the Task Type. Once you do it, this setting will determine which custom properties you should enter.


Save sent emails on IMAP Server
Listening to our users we decided it was time for sent emails, to be stored on IMAP servers. The direct benefit is that they will be available in the “Sent Emails” folder of other mail clients and devices (i.e. cellphone).

After your Feng Office is upgraded you will see this new panel while adding or editing your mail account:

Once you fill in the details, all emails you send from Feng Office will be stored in your IMAP server in the folder you chose.

If you are an account administrator, you can turn this feature off . Under Administration -> Configuration ->Mailing you should mark “No” for “Enable IMAP Synchronization when Sending Email”.

Login using your email
For your convenience as of this release you will be able to log into all Feng Office installations using either your email or your username. This way you can avoid having to remember yet-another-username. It’s very simple to use, just input your email and password on the login screen.

Direct URL
In all system objects you will notice that the Direct URL has been added. This URL can be clicked and it will open a new window or tab showing the same object you are viewing. This URL can be copied and pasted for direct use, or used directly from external apps.

And more …
Other new features include notifications when there are unsent emails, use of quotations for exact search, new task status filters and export all contacts to vcard.

How do I get it?
Feng Onsite 1.7.1 is available for download here. Feng Sky installations will be gradually updated starting today. In case you encounter any issues with the new version, please report them on the support ticketing system or directly on the bug tracking system. If you don’t like any particular change made to the system or would like to suggest an idea or further changes, feel free to start a discussion topic at the forum.

Are these features useful for you?





12
Announcements / Feng Office 1.7 has been released!!!
« on: June 30, 2010, 12:36:11 pm »
Feng Office development team announces the release of Feng Office Collaboration Platform version 1.7.0. Feng Office latest version includes more than a hundred bug fixes and lots of usability improvements and new features.

Feng Onsite 1.7.0 is available for download here. Feng Sky installations will be gradually updated starting today, and ending on ten days approximately. In case you encounter any issues with the new version, please report them on the support ticketing system or directly on the bug tracking system. If you don’t like any particular change made to the system or would like to suggest an idea or further changes, feel free to start a discussion topic.

E-mail module improvements
As more and more Feng Office users start to rely on Feng’s e-mail module, it was time to give the e-mail module a little love and caring.

Most operations are now running faster, improving the overall experience of managing e-mail using Feng.

Long time request of having the e-mail list refresh automatically is finally included.

Export reports as CSV
All reports can now be export as a CSV file. Using this feature you can process the data of the report on your favorite spreadsheet application (ie: Excel, OpenOffice Calc, etc.).


Latest activity
Do you need to know what’s going on in a Workspace? Take a look at the new Latest Activity widget and find what the latest changes are: who’s completed a task, which documents have been uploaded, and who’s confirmed attendance to a meeting.


And more …
Other new features include LDAP support, guest users, a new five day view for the calendar, prettier email notifications and more …

Download it here

Changelog
Since 1.7-rc3
   ------------
   bugfix: Cannot generate pdf from reports.
   bugfix: Upgrade script fixed.

13
Announcements / Feng Office 1.7 RC3 has been released!
« on: June 23, 2010, 06:27:56 pm »
WARNING: This release is not suitable for production environments. It's only for evaluation and testing purposes.

Download here

Changes since 1.7-rc2
   ------------
   bugfix: Double refresh necessary to view mail inbox
   bugfix: Last instance of a repetitive task not showing in calendar when repetition is until a date.
   bugfix: Task end date being incorrectly saved   
   bugfix: Object picker filtering not working correctly   
   bugfix: Email not going into workspace   
   bugfix: Reporting error sorting by Workspace
   bugfix: Solved Error: 'A[C.xtype||D]' is not a constructor when browsing workspaces
   bugfix: One calendar event appearing in wrong date in specific scenario.   
   bugfix: Task dates issue   
   bugfix: Wrong dates when deleting and restoring comments
   bugfix: Birthday dates are always shown in calendar.   
   bugfix: Time slot edit looses billing info   
   bugfix: Using drag + drop does not register in application log   
   bugfix: Parent task picker not working   
   bugfix: Empty trash bug deleted objects incorrectly   
   bugfix: Added color for urgent issues in task view    
   bugfix: User could accept other users invitation to event.   
   bugfix: Dates issue in comments   
      
   system: Cleared warnings   
   system: Some language fixes

14
Getting Started / Re: OpenGoo Training Videos
« on: February 15, 2010, 12:41:21 pm »
sticked

15
Older versions / Re: bug with this forum
« on: July 22, 2009, 01:00:05 pm »
Checking spanish now, gonna take a look

Pages: [1] 2